Surface Preparation
• The surface to be coated must be completely dry and clean, free from dust, cement debris, grease stains, or any glossy coatings
that may cause the coating to peel off.
Application Procedure
• The solution can be applied by spraying or using a brush or roller, repeating 1–2 times depending on
the desired gloss level. Each layer should be left to dry for approximately 2 hours.
• After application, allow the surface to dry for 12 hours before use.
Post-Use Cleaning
• Tools should be cleaned and the product rinsed off with thinner or solvent immediately after use.
• Any remaining material should be tightly sealed before storage.
Recommendations
• Work in a well-ventilated area.
• Do not apply on days with high humidity or rain.
• Keep out of reach of children, away from heat and open flames.